Malware

I had to delete one of my links because it was causing the site to be flagged as malware. My apologies to anyone who tried to access the site and was scared away.

By removing the site the problem seems to have been removed as well. Fortunately according to the webmaster tools site no malware has been downloaded from this site, so nothing on this site will have affected your computer.

The link was to modelrailroaders.ca for anyone who is curious. It is now removed from the sidebar.

Updates

The National Narrow Gauge Convention in Hickory NC has come and gone.

I didn't attend, no good reason just other things came along.

I never got my Saltillo modules done, so I guess it really doesn't matter anyway.

Another Atlas Pacific has joined the ever-growing standard gauge fleet, and three little Z scale Mikados arrived last week to begin their transformation.  I
have RLW parts for the pilots and cylinders and I have Bachmann 0-6-0 shells, but I could really use one more.

I'm trying a little something different with tenders this time around, I have an RLW K36 tender that I am going to put together as a temporary stand-in until I am able to afford the EBT Mikado kits. I think it will do OK, if I like it I will get two more.

And now I'm saving my nickels and dimes and writing letters to Santa for three Republic Locomotive Works EBT Mikado kits.

I would say something about benchwork, but alas I have made absolutely no progress. I have this convertible Mustang you see, and the days have been warm and sunny...

Top picture, from left to right; scratchbuilt tender Bachmann shell, completed locomotive; K37 tender, Bachmann shell, newly started locomotive; RLW EBT Mikado kit, completed locomotive.  The next two pictures show the tenders in the same order. The K37 tender needs to have its upper flange repaired, I broke it off when I was examining it.

I have two other Mikados to transform besides the one pictured, so that will bring me up to a grand total of five Mikados, one Mogul and an American. I have enough rolling stock for a rock train, two TOC coal trains (one for the Mogul and one for the American) and a passenger train. I really need one more bobber and one more eight-wheeled EBT caboose, and then I need to start acquiring and building coal hoppers. I also need to add a good number of boxcars and flatcars to the mix as well. As it is I will end up having more locomotives than trains.

I also need to dig into the new Atlas and find out why it all of a sudden just stopped running. I think I have enough rolling stock to keep most of my standard gauge locos gainfully employed, and I'm hoping the new Atlas will double-head with the Model Power Pacific.

I really need to get started on benchwork now. Winter is coming, so progress should be made sometime soon (I hope).

Motive Power, Part 3

It has been a long time since I have updated the site.

The Pennsy L1 is done, the paint just went on it this last weekend. It is a beautiful loco and a strong puller. It won't stay on my current horrible trackwork, but all of that will change when I get the new layout up and running.

Speaking of the new layout, I have finalized the plan for the PRR portion of the Path Valley. The PRR portion is just a double loop that incorporates an interchange with the SR&W at Duncannon PA, not prototypical at all but it will suit my needs. It will be built on a 3x7 door. I'm hoping to have construction started soon, but I have been hoping to have construction started for quite some time now.

The Atlas locos have both been re-motored and they are running fine. The Mikado does not like my trackwork any better than the Kato, but the Pacific does just fine. Both of these have to be run on a transistorized throttle that I built from an MRC unit, they ramp to full speed and don't have any fine control on a rheostat throttle. Just as well, I suppose, since I was planning on building more transistorized throttles anyway.

I picked up an Arnold Pacific as well, so now I have three Pacifics and two Mikados. The train set Consolidations have been shipped off to a new home where hopefully they are providing their new owners with good service and much enjoyment.

The train table has been cleared of trains and the track is being pulled up a little at a time. When the track is all up I will dismantle the table and hopefully be able to use it's pieces for the new benchwork. I don't know what I will end up doing with the roundhouse and turntable, but they will be stored away for future use or sale depending on what happens.

I also picked up another J class, but it is the older model and does not run. I am investigating the possibility of sending it to Bachmann for replacement, we will see how the warranty goes with the new warranty policy.

Turnouts, part 3

All five turnouts are now complete. Next I build the framework and module tables. I am planning on going with two standard Nn3 modules in the size of 1'x4', 1x3 framework and 1" foam on top. Track will be at the 6" centerline as per Nn3 Alliance standards.

I will also have to scratch build some structures, but I'll deal with that issue after the track has been planned out, the road bed has been laid and the whole shooting match is ready for scenery.

I haven't been able to find out if there are going to be any Nn3 clubs at the convention, so I am not sure how to go about getting the modules entered. First things first though, they have to be built before they can be entered.