Passenger cars

Three of the four Shapeways passenger cars; two coaches and a baggage car. The combine was, unfortunately, destroyed by my rough handling. These cars are fragile!

They are smaller than the converted Bachmann cars I have, they aren't as tall and have no letterboard. Part of this is due, I think, to the RLW roof I have on Coach 24. I should have trimmed off some of the Bachmann's letterboard, in comparison to the Shapeways car it looks encephalitic.

Parlor car 20 has the original Bachmann roof so it isn't as bad, but it is still taller than the Shapeways cars. The picture is a bit blurry because the camera chose to focus on the background (one day I'll have to learn to use the settings instead of the automatic functions), but it shows the difference in car heights. (Yes, I know, I need to put battens on the parlor car under the window trim. Yes, I know, the center window isn't actually on center on one side of the prototype. It's an N scale model, give me a break.)

One thing I should have done and didn't is put "glass" in the Shapeways cars. I didn't think it would make a big difference, but it definitely does. Clear plastic from the coupler packages would have filled the bill quite nicely. I will do this in the future, but the roofs are glued on these cars and they would be destroyed if I tried to remove them, so they are going to stay the way they are.

In conclusion, the Shapeways cars are a quick and easy (and inexpensive) way to expand your varnish fleet, they are easy to assemble and the results are good. Just be careful with them and they should do fine.