Real Estate Disputes and Other Matters

My train room is being taken over by closet space.

Ever since the charming and lovely Mrs Hades agreed to take up space with me we've been moving things around. What was big enough for one person (me) has proven insufficient for two, so along one wall of the "train room" there is now shelving and clothing.

Everything that was along that wall has been moved to the opposite wall, where I'm pleased and somewhat surprised to report it all fits...tightly, to be sure, but it fits.  The large 4x8 N standard layout has been disassembled and all that is left in the center of the room is the uncompleted Nn3 layout.

Unfortunately it looks like that may have to find another place to live as well, or be disassembled and the parts used for something else. (Maybe I can finally do the long-planned Saltillo modules, complete with the NARCO quarry branch.) Also on the block is the proposed Z scale layout, I just don't have the room for it as things stand now.

Two things I am looking at is double decking and reducing by one the number of standard gauge N scale layouts. If I reduce the number of N standard I will be finding somewhere to put the rock quarry. I could then put the Z scale in the corner and put the Nn3 on a shelf over the top of the standard N.

Losing the quarry wouldn't be a huge blow. It has given me some experience in working with foam at least, and the performance of the Bachmann set that prompted the layout has, as is typical with Bachmann 4-4-0's, been disappointing to say the least. I can at least use the benchwork for one part of the Z scale, so that isn't a total loss either. Finding civil war era buildings for the rock quarry has been problematic as well, and the effort would be better served finishing the scenery on the other standard N scale layout.

But enough about that. Moving has been completed enough to take a little break at least, so I've been spending time in the train room tuning engines. I've finally gotten all of my Pacifics to work reliably and I've even been able to get my two Atlas 4-4-0's to run decently again (the unpainted one threw a tire after being painted and the undec didn't run well out of the box).

I've been working on the 2-8-0's as well, they don't like tight corners. The problem is some Bachmann engineer in a fit of brilliance decided that metal would be a good material to cast the cylinder fronts out of, so when the pony wheels touch it they short out. I've had to carve and cut them away to clear the pony truck wheels, they look terrible up close but after they were painted they are hardly noticeable from operating distance, and now they will actually run on the 11" radius curves like they are supposed to.

Last but not least I added a siding to the backside of the Clarinda modules.  I've been thinking of doing that for a while because it adds some operational flexibility. Now I can have a passenger train laying in wait to take a few laps while the freight train is on a siding, either in the front or in the back. I've tried it both ways and it is working as planned.

Next week I hope to get some of the scenery done on them. We'll see how that goes.

Shapeways Model Trains

I have purchased several things through Shapeways such as 2 bay East Broad Top hoppers, the EBT M-1 (I actually bought two of those because the design was updated and is much better), and passenger cars in both Nn3 and Z scale. The upside to Shapeways is you can get designs that are not available elsewhere, the downside is the process makes a somewhat grainy textured product that is quite fragile in some cases. There are some tricks to reduce the fragility, and in my opinion the bonus of being able to get what you want overshadows the drawbacks.

One of the complaints I had about the Shapeways site was having to perform several searches to find the products I wanted. Apparently Shapeways became aware of the problem, and I'm happy to say they solved it by making a dedicated model train page.

I think model railroading has a bright future in 3D printing, and I'm excited to see Shapeways leading the charge.

(Note to the FTC, I write this post as a satisfied consumer and did not get paid for it in any way, so bugger off.)